Responding to global safety standards

This page introduces compliance with the global safety standards. Our products are developing products by product development and design based on IEC technical standards. We are also acquiring safety standards (PSE, CCC, KC mark, BSMI, SIRIM, BIS, UL, NOM, IRAM, EAC, GS, RCM etc.) for countries around the world.

Do you know that manufacturing plants need to be licensed and approved from the appropriate agencies in obtaining and applying safety standards in each country?

At UNIFIVE, we receive a stricter audit than each third-party certification body, have been approved as a factory conforming to each country's safety standards, and acquire safety standards of AC adapter and switching power supply all over the world.

 

Responding to world safety standards

 

The products Unifive is developing products by product development and design based on IEC * 1 technical standards.

 

We also offer a wide range of models that can be deployed to shipping countries other than Japan, according to customer's request.

We can also respond to customers' introduction of the technical standard compliance model in the shipping country to our customers when we consider the market development in other countries.

 In addition, even if the customer's requested destination is not supported, it is possible to conduct application / acquisition work. Furthermore, even if we need to apply / obtain safety standards to shipping countries according to customer's request, we are carrying out acquisition work.

 

    * 1, IEC is an abbreviation for International Electrotechnical Commission. It is an international standard organization dealing with electrical engineering, electronics, and related technologies. We are developing in part with the International Organization for Standardization (ISO) such as regulations for the creation of international standards (Directives), standard conformance (ISO / IEC 17000 series) and IT technology (ISO / IEC JTC 1).

    * 2, Unsupported areas are also available depending on shipping country. For details, please separately contact each office of UNIFIVE.

Workflow in Acquiring National Safety Standards

For reference,

In order to apply / obtain safety standards to shipping countries according to customer's request, we will proceed with the following procedure according to the following procedure.

STEP1

Customer
  • Development completion model from Unifives, AC adapter / open frame product evaluation completed.
  • Request to obtain national safety standards for UNIFIVE.
UNIFIVE
  • Receiving requests from customers, apply for estimating the acquisition cost of each country's safety standards to a third party certification organization.
  • Started preparations for acquiring and applying national safety standards.

Third party certification body
  • Receiving requests from customers, apply for estimating the acquisition cost of each country's safety standards to a third party certification organization.
  • Started preparations for acquiring and applying national safety standards.

STEP2

UNIFIVE
  • Acceptance quotation presented by third party institution with acquisition cost of each country safety standard.
  • Issue and submit an estimate of the acquisition cost of each country's safety standards to the customer.
Customer
  • Acceptance cost estimation for national safety standard acquisition from UNIFIVE.
  • Application form for acquiring national safety standards to UNIFIVE.

STEP3

UNIFIVE
  • Receive requests from customers, start and submit application procedures for obtaining national safety standards to third party institutions.
  • Preparation of materials related to application materials.
Third party certification body
  • Acceptance of national safety standard acquisition application from UNIFIVE commence test.
  • Issuance of certification acquisition certificate and test report to UNIFIVE after completing national safety standard acquisition test.

STEP4

UNIFIVE
  • Acquisition certificate of national safety standard certification acquisition from third party organization and acquisition / sending of test report.
  • Exchange of specifications with customers.
  • Start mass production · Deliver products to customers.
Customer
  • Acceptance and confirmation of national safety standard certification acquisition certificate and test report from UNIFIVE.
  • Conclusion of specifications with UNIFIVE.
  • Issue order form for mass-production to UNIFIVE.
  • Product shipment to each destination after delivery of products from UNIFIVE.
  • Mainly using CB REPORT as IEC technical standards, we are promoting acquisition of national safety standards.

Acquisition of safety standards of each country and compliance with technical standards

National safety standardtext
All over Asia
  • Japan: PSE / S mark
  • China: CCC
  • Korea: KC mark
  • Taiwan: BSMI
  • Singapore: SAFETY MARK
  • Malaysia: SIRIM
  • India: BIS

North America / Latin America Region
  • Canada / USA: UL standard
  • Mexico: NOM
  • Argentina: IRAM
European Region
  • Russia: EAC mark
  • All over Europe: GS mark
Other regions
  • Australia
  • New Zealand: RCM
  • South Africa

* These are examples where UNIFIVE acquired national safety standards. Please do not hesitate to consult with UNIFIVE if you consider examining acquisition of safety standards in other regions / destination country.

In addition, the use applications of AC power adapters in recent years have increased in various ways. Until now, only the "information and telecommunications related" and "AV equipment related" were satisfied, the standard was satisfied, but the customer such as "medical equipment related", "lighting equipment related", "general electric appliance related", "charging application related" We will strive to supply safe and reliability products towards product development together with customers, including manufacturing and customizing to suit your requirements.

TIPS

Do you know? In order to apply for acquiring safety standards of each country it is necessary that approval of the manufacturing factory is necessary ...
In Uni-Five, we receive a stricter audit than each third-party certification body and are approved as a factory conforming to each country's safety standards.

UNIFIVE's China Factory Quality Recognition

  • ISO9001 :2015 Certification (CertificationAuthority CQC)
  • ISO14001 :2015 Certification
  • Japan PSE Safety Standard Factory Certification Acquisition
  • United States UL and CUL Safety Standard Acquisition
  • Europe TUV Safety Standard Factory Recognition Acquisition
  • South Korea KCC-MARK Safety Standard Factory Recognition Acquisition
  • Chinese CCC Safety Standard Factory Recognition Acquisition
  • Taiwanese BSMI Safety Standard Factory Recognition Acquisition
  • SONY“Green Partner" Acquisition

You can get the product catalog in PDF.

Product initiatives

Since 1989, UNIFIVE has maintained the quality of their AC power adapters and switching power supplies through rigorous quality controls.

See more